CCTV balun
- Product Number : Active Transmitter video balun
- Product : 1 port to 1 output
Application
(167 KB)
DESCRIPTION :
The Active video balun also makes it possible for long-distance video signals to share the same wire bundling with data, telephony and low-voltage power circuits, thanks to the product special shielding design and low emissions capability. It also offers protection against voltage spikes and helps prevent interference from ground potential differences.
SPECIFICATIONS :
DC to 8 MHz
Distance Switch:
3 positions:
"L" for distance less or equal to 500m
"M" for or distance between 500 ~1000m
"H" for or distance longer than 1000m
Common mode / Differential mode Rejection:
60 dB typ. at 15KHz to 8 MHz
Impedance:
Coax, female BNC 75 ohm
UTP, Terminal Block 100 ohm
Power Required:
24VAC/DC, 250mA max. (not included)
May share 24 VAC power with camera. Providing supply is floating
LED Indicators:
Red: Power
Green: Video
Cable UTP:
Cat2. or beter, AWG #16~24 (1.3-0.5 mm)
Impedance: 100 ± 20 ohms
DC Loop Resistance:
52 ohm per 1,000 ft (18 ohms per 100 m) for Cat.5 AWG#24
Typical Distance:
1.8km, when used with 121121 active receiver and Cat.2 or 3 UTP cable
> up to 2.5kms if good environment, used with 121121 active receiver and Cat.5 or better UTP cable
Differential Capacitance:
19 pF/ft max (62 pF/m max)
Temperature:
Operating: 0° to +50° C
Humidity (non-condensing): 0 to 95%
Dimensions excluding BNC: 3.0" x 1.6" x 1.1" (75.6 x 40.9 x 27.1 mm)
Weight: 100 g
Material: Black ABS
PRODUCT NUMBER :
PN: 121TR1 for one kit, including one Transmitter and one Receiver