CCITT Mini Balun , Ideal in applications where size and spare are restricted

Ideal in applications where size and spare are restricted

The Mini Balun, a fully shielded product which is ideal in applications where size and space are restricted due to small dimension. They are intended for panel or cable mounting and feature IDC termination allowing installation without special tools. They are available in three versions: 2-8Mbit/s, 2-8-34 Mbit/s or 34 to 155Mbit/s.
These mini Balun surface mount transformers are replacements to traditional coaxial, ceramic and printed circuit board baluns. Designed for matching to the differential inputs and outputs or modern chipsets. Conversion to twisted pair cabling enables the use of high density IDC modules in digital Distribution Frames thus decreasing wiring densities more than 5 times.

# No AC power or batteries needed
# Link-to-data isolation: Mini. 250V
# Bi-directional signal conversion
# Operating temperature: 0-75°C
# Ultra-miniature enclosure
# Typical distance on good quality cable will be 180 meter

* Contacts plated min 1.25μNi & min 1.25μAu
* IDC connect/disconnect cycle >20
* Coax connectors with Be/Cu contacts and Teflon insulators
* IDC to suit 24.26.28 AWG Copper cable, Teflon insulators.
* Body parts plated min 5μ Ni
* Coaxial connector connect/disconnect cycle >500
* Cable anchorage is via a tortuous path around the stuffer cap and grounding ring
* IDC contacts phosphor Bronze

2-8 Mbit/s speed version for E1 (T1) / E2 (T2) data streams
Impedance: 75 ohm to 120 ohm/100 ohm
Insertion loss: Max. 0.2dB (2Mbps); Max. 0.3dB (8Mbps)
Return loss: -29dB(2Mpbs); -21dB(8Mpbs)
Cross talk: better than -80dB from 0.1 to 12MHz between any 2 baluns mounted distance up to 15mm

2-8-34 Mbit/s speed version for E1 (T1) to E3 (T3) data streams
Impedance: 75 ohm to 120 ohm/100 ohm
Insertion loss : Max. 0.3dB(8Mbps); Max. 0.9dB from 0.2-70MHz
Return loss : -21B(8Mbs); -15dB from 1 to 70 MHz
Cross talk : better than -60dB from 1MHz to 70MHz between any 2 baluns mounted distance up to 15mm

34 to 155 Mbit/s speed version for E3 (T3) and higher data streams
Impedance: 75 ohm to 120 ohm/100 ohm
Insertion loss: Max. 0.8dB from 860 KHz to 52 MHZ Max. 1.5dB from 50KHz to 240 MHz
Return loss: Max. 15dB from 1MHz to 240 MHz
Cross talk: -80dB from 1MHz to 240MHz

------------------------------------
Ordering example:
I need a mini balun, with 1.6/5.6 male connector, for T1 data speed and my cable size is 28-30 AWG. What is the PN number ?

PN = 1341730101
Description:
134 = IDC type
17 = 1.6/5.6 connector
3 = mini balun
0 = male
1 = standard connector
0 = T1 speed, 2-8Mbit/s
1 = for AWG 28-30 cable

Need help ? Contact us !
------------------------------------